Според мен в този случай не би следвало да се замества панамата с наличната. По-принцип ще стане гоблен, но едва ли ще има желания резултат. Дай адрес, миличка, и размер на панамата - бих молга да ти изпратя. :kissyou:
Printable View
Момичета исках само да се похваля ,че днес успях да си намеря панама Айда 14 и съм много щастлива:party: Еее не беше много евтина ,но карай,не ми се чакаше.Купих си и чилета и утре захващам "Почти идеален". Дано само съм уцелила панамата:confused:Благодаря много за съветите :kissyou:
Момичета.харесах си един гоблен на Риолис.В упътването пише канва К6.Знаете ли това на какъв каунт отговаря?
Мисля,че това отговаря на 16 каунта,но не съм сигурна:confused:-нека и др.да кажат:idea:
К6 означава, че в един см има около 6 бода. Това е 16 каунт.
Момичета,благодаря ви за бързата реакция.
Здравейте, след лятото се оказа че доста неща съм забравила...та трябва скоро да ушия гоблен на синя панама, модела е 18х13 см при 14ст Аида, но си взех готово пакетирано пакетче аида 18ст 20х25 см дали ще ми стигне
Разгледах разните калкулатори, но за да приравня трябва да имам брой бодове, а аз така информация нямам или нещо не мога да се сетя как да го получа :uhhhh:
Благодаря предварително на всички
Теодора
tdimova@mail.bg
Сто процента ще стигне. 14 каунт означава 14 бода на инч, което прави около 5.5 бода на сантиметър. Проблем ще е ако моделът има половинки или четвъртинки бодове и ще се цепи панамата. 18 каунт е по ситна от 14 и ще ти е по-трудно шиенето.
А, за да си най-спокойна, при този малък гоблен, просто броиш бодовете от схемата и дупчиците на панамата и разбираш, че ще ти стигне. :idea:
И да допълня - не ти трябва калкулатор за панама. Делиш каунта на 2.54 колкото е един инч и получаваш брой бодове на сантиметър. Например 18:2.54=около 7. Прибавяш колкото искаш сантиметри за резерва и готово. Повечето схеми са разчертани на квадратчета по 10 бода, така че по схемата лесно се брои.
По обратният път размер 18х13 см на 14 каунта отговаря на около 99х72 бода.На 18 каунта ще се получи размер около 14х10 см.Не виждам как ще стане по бавно на единия каунт в сравнение с другия при положение ,че броя на бодовете е един и същи:idea:Просто на по-едрата панама се шие по лесно и става по-голям
Здравейте, искам да попитам шил ли е някой на белгийска панама с тройна нишка, за да си сподели мнението.
Здравей, parvanovska, ако питаш за аида, да, шила съм, ако е за цели кръстчета, няма проблем. Ако обаче трябва да се шият четвъртинки, няма как да се нацели средата.
Иначе панамата е хубава, плътна и на много добра цена. Ако намеря, вероятно пак ще си купя.
Здравей biskvitka,
Ами харесах си един гоблен (готова комплектовка), който се шие на белгийска разграфена панама с тройна нишка. Шие се с гобленов бод половин кръст. Чудя се дали така да си го шия или пък да си взема обикновена българска разграфена панама и да си шия с двойна нишка. Не знам с тази тройна нишка дали няма да стане малко грубо, това ми е дилемата.
Здравей!Има разлика между гобленов бод и половин кръст-разликата е в обратната страна на гоблена и плътността на покриване на гоблена..Според мен няма да е проблем да си шиеш на БГ разграфена панама с гобленов бод,ако както каза бисквитка ,има само полукръстчета по инструкцията-гоблена евентуално ще стане по-малък като размер/Зависи колко каунта е белгийската/
Аз шия от март тази година гоблени и не съм много наясно с видовете бодове. Ушила съм 2 гоблена със обикновен гобленов бод. А въпросния гоблен, жената в магазина ми обясни, че си се шие с обикновен гобленов бод, но панамата е малко по-едра и за това трябва да е с тройна нишка. И май ще си купя БГ панама и ще си го ушия с двойна нишка.
Момичета, може ли да ви попитам - коя е най-подходящата панама за шиене на смесен гоблен - с кръстчета и гобленов бод и има ли значение при шиенето на кръстчето дали наклона на горната нишка трябва да съвпадне или не с наклона на гобленовия бод - доколкото знам това ще се отрази на крайния резултат в наситеността на цветовете, но може и да бъркам - не зная кое е правилното :confused:.....затова се обръщам към вас като ескперти :idea:
Ако гобленовият бод ти се явява като 3/4 бод, най-добре ще е 28 каунт, или 14-ката ще трябва да я цепиш. Ако имаш гобленов бод като 1/2 бод и 14-, 16-, 18-ка ще ти свършат работа.
Наклона обикновено е показан в обясненията. При някой трябва да съвпадне, при други не...........
Ама и аз го обясних - разбрах си го при 3-тото прочитане, я дай част от схемата и гоблена за който питаш..............
Вероятно става въпрос за смесен бод кръстче и полукръстче, защото поне аз досега не съм срещала гоблен с кръстчета и гобленов бод. Относно кръстчетата мисля че панама 14-ти или 16-ти каунт са най-подходящи. 18-ката на мен поне ми идва твърде ситна. Ако няма никакви указания за посоката на кръстчетата и полукръстчетата в гоблена, който си избрала, трябва полукръстчето да е със същия наклон като горната нишка на кръстчето, т.е. гобленът да е изцяло в една посока. Но понякога в указанията е посочено да се шият с различен наклон за да се постигне някакъв ефект - примерно открояване на отделни детайли. Имаше някъде във форума специална тема за кръстчетата и полукръстчетата, но сега не я намирам.
Благодаря ви за светкавичната реакция, момичета :kissyou: - моето колебание действително е между Аида 14 и Аида 16 - притеснявам се да не би на Аида 14 полукръстчето да стои по-рехаво, защото все пак тя е по-едра панама от Аида 16... Да, за полукръстче става въпрос - аз неправилно съм го посочила като гобленов бод и лошото е, че нямам обяснения, за да преценя за наклона на горната нишка на кръстчето, но ще го направя с един наклон - лошото е, че нямам и снимка да ви изпратя - като напредна малко ще ви покажа резултат - това е един тигър от по-стара колекция на гоблените на Мая - главата на тигъра е изцяло на кръстчета, а листата около него се шият с полукръстче
Не се притеснявай, че с полукръстчето се получава по-рехаво. Нали такъв ефект се цели - на дълбочина, за да изпъкнат детайлите, които се шият с кръстчета.
Аз винаги се съобразявам с панамата,която е заложена в оригиналния комплект.Ако искаш качи снимка на модела...
Щом модела е на Майа - Аида 16 ,горния конец на кръстчето и полукръстчето в една посока.
Здравейте момичета!Искам да попитам какво представлява панама Лугана 25,дали някой е шил на нея,с какъв бод се шие,какъв е размерът в сантиметри на 10 бода от панамата,може ли да се купи от някъде и горе-долу каква е цената.Нищо не знам по въпроса,а съм се засилила на едим модел,който ми хареса,но руската дама го бродира на тази панама.Ако някой има информация-моля пишете!Благодаря ви!
http://shop.milenastyle.com/product_...oducts_id/1679
Ето от къде може да се поръча и цената. Обърни внимание, че това е цена за парче с определени размери.
25 е каунт и значи, че на един инч се ушиват 25 бода. Малко по-ситна е от обикновената българска панама. Около 10 бода на сантиметър. Може да се шие гобленов бод с две нишки. Някои гобленарки я ползват, за да стане по-плътно покритието, т.е. да не прозира панамата. Може да се шие кръстче през нишка, но не става добре - доста грубо е.
Nelly_L благодаря ти много за бърият отговор.За Миленастил не бях се сетила.Щом е малко по-ситна от българската,излиза,че преспокойно може да се ползва и българската панама,даже ще се получи малко по-голям размер на изработката.Мисля,че ДМС с две нишки 1:1 на българска разграфена панама дава добро покритие.Много ти благодаря мила Нели!:kissyou:
Здравейте момичета, имам нужда от вашата помощ.Имам схема на която е обяснено ,че се шие на 14 каунт панама с кръстат бод.Аз не съм фен на кръстатия бод и искам да попитам дали според вас ще се получи добре ,ако шия на 16 или 18 каунт 1:1 с три ката конец гобленов бод?
Не съм някакъв супер специалист и ще ти кажа какво е моето мнение. Много зависи какво ще шиеш все пак. Аз също не съм фен на кръстатия бод, но в момента шия една серия на Риолис, която е на 14 каунт и е с кръстчета. Стават фантастични. Ако искаш можеш да видиш 2/3 от ушитото на единия от тях в темата ми mirastiv-Етапи на райската градина на Леврон. Ще видиш, че е много красив, въпреки кръстчетата. Но много зависи, разбира се какво точно ще шиеш и каква е комплектовката. Аз лично бих започнала малко на 14 каунт- няма да ти коства много конец, за да прецениш дали е добре.
А има и друго- имам един гоблен, който като теб реших да шия на 18 каунт 1:1 гобленов бод, въпреки че в оригинал трябваше да са кръсчета. Стана много хубав, но в процеса на шиене установих, че имам места където ще се получи много по-добре ако е с кръстче и заради това ми се наложи да импровизирам и да правя промени, за да се получи добре.
Така че...не знам. По-добре пусни 1 картинка какво ще шиеш, за да може да получиш по-адекватен съвет. :kissyou:
Успех!
Щом дизаинерът е дал да се шие на 14-ти каунт с кръстче, значи така ще се получи наи-добър резултат. :idea:
http://radikal.ru/F/s017.radikal.ru/...192e.jpg.html? Ето това съм си харесала.
Не съм кой знае какъв специалист,но това не е качествена разработка.По-добре не си губи времето,труда и средствата точно с това.Виждала съм го ушито и резултата е плачевен,особенно ако си попаднала на разработката за която си мисля (то и честно казано май друга не съм и виждала)По-добре покажи част от схемата да си кажат мнението и другите.
Ето тук има етап от този модел, сама прецени:
http://www.goblenite.org/attachment....9&d=1264360426
Аз не разбрах този етап как е шит ?На каква панама и с какъв бод?Че не се вижда много ясно.А колкото до качване на схема не успях че е pdf.
Можеш да шиеш на 18 каунт с гобленов бод с 3 нишки, въпросът е дали си заслужава труда, затова ти показах етап, виж картината, виж и получилото се и реши .....................
Това ли е разработката за която говориш Нели?http://img0.liveinternet.ru/images/a..._la_ropa_1.pdf
Да,това е.Даже и did_tag е показала етап на гоблена.Вече ти ще си прецениш дали те устройва този резултат и въобще дали да си хабиш труда.Картинката наистина е много хубава,но...Решението в крайна сметка си е твое.Ако искаш поизчакай,посъбери още мнения,огледай и други гоблени-има толкова хубави и качествено разработени гоблени и покази в етапи тук във форума.Всеки има право да си ушие каквото иска,но ще е жалко да си хвърлиш времето и труда на вятъра,а и разочарованието след това няма да е малко.Просто искахме да те предупредим,нали за това е този прекрасен форум-да обменяме опит,мнения и да си помагаме.
Ако не се лъжа sanita беше споменала че го е обработила и ще го предлага/продава/,но май още не се е похвалила да е ушила нещо от него,за да видим какво ще се получи.